Many customers think that steel is "indestructible", but in fact, improper maintenance methods are the number one killer of paint peeling and rust. This guide aims to answer all your questions in the process of asset preservation through the most professional dimensions.
Q1: Does steel furniture need to be wiped with a wet cloth every day?
A1: Absolutely wrong. The biggest invisible enemy of steel furniture is humidity. Frequent use of rags with moisture, moisture is very easy to seep into the micropores or seams of the paint, causing oxidation and rust from the inside.
Expert advice: You only need to use dry and soft cotton cloth for daily dust removal. Only when there are obvious stains, a slightly wet cloth can be used, and it must be wiped dry with a dry cloth within 30 seconds.
Q2: Can the paint be disinfected with alcohol if it is stained with coffee or oil scale?
A2: Extremely dangerous. Alcohol, thinners or strong acid and alkali cleaners will destroy the cross-linking structure of powder spraying, resulting in the loss of luster of the paint and even the appearance of orange peel.
Expert advice: Only use diluted neutral detergents (such as tableware detergent). For stubborn offset printing, please use professional glue remover to apply, and do not spray in a large area.
Q3: If I accidentally rub the metal background, will this cabinet be scrapped?
A3: It does not need to be scrapped, but it needs immediate "first aid". Once metal is directly exposed to the air, the rate of rusting will increase exponentially.
Expert advice: Clean up the damaged area immediately and use a paint pen of the same color for point repair. If there is no touch-up pen, in case of emergency, you can use transparent nail polish to seal the damaged mouth and block the entry of air, and repair it after the professional tool arrives.
Q4: The office is in the south/by the sea. What should I do if there is always mold behind the furniture?
A4: This is a typical lack of "breathing space". If the steel furniture is close to the wall, the alternating cold and hot on the back will produce condensation, causing the back panel to rust.
Expert advice: Strictly follow the "5cm principle" - keep at least 5cm ventilation gap between furniture and walls and furniture and furniture. Be sure to turn on the dehumidification mode during the rainy season.
At Belivio Furniture, every piece of steel furniture we sell is equipped with "full-cycle maintenance support". We are well aware that good products need good service, and good service begins with professional knowledge transfer.